|
whgdmk12345
1098 Messaggi |
 Postato il 12/05/2022 : 02:24:36
|
https://www.mktester.com/high-voltage-tester/vlf-hipot-tester/vlf-high-voltage-generator-60kv.htmlProducts Introduction#65306;
VLF high voltage generator 60KV.The capacity of it is 1/500 of tradition way. Greatly simplify testing procedures, That is why commonly used in the developed countries, china ‘s ministry of electric power entrust Wuhan high voltage research institute to drafting “ 35Kv and below XLPE insulated power cable ultra-low frequency (0.1Hz) voltage withstand test methods ‘for promoting this approach. The instrument is developed according to China's made of this need. It can be widely used in cable, large-scale high-pressure rotary motor, power capacitors into AC voltage withstand test.
Power capacitance of single-core XLPE insulated cable (µF/km)
0.1Hz -60KV Ultra-Low Frequency High Voltage Generator
Model
Rated Voltages
Load capacity
Fuse
Weight
Useful
VLF-60
60kV
(peak )
0.1Hz,#8804;0.5µF
25A
Control #65306;6#13199;
HV TANK-I#65306;30#13199;
HV TANK-II#65306;33#13199;
25KV and below the cable#12289;Generator
0.05Hz,#8804;1.0µF
0.02Hz,#8804;2.5µF
0.01Hz,#8804;5.0µF
Precautions#65306;
1.Please use the STOP button and discharge by rod then shut down the power if you need to discontinue the machines which in the high pressure conditions.Otherwise it will damage the instrument!
2.Please operation it according to the screen instructions.
3.It is a normal phenomenon to see small amount of oil spill after boosting the pressure because the insulating oil in the booster is full, besides, it will not affect your use.
4.When carrying out 10KV cable test, one-phase test is strongly suggested. The voltage shall be 18KV and the frequency shall be 0.1Hz#12289;0.05Hz#12289;0.02Hz#12289;0.01Hz. The manual said load capacity is the theoretical value, the scene 10KV cable length can reach 3-20km. |
|
VLF High Voltage Generator 60KV
