Area myBM
Username Password  
Non ricordi i tuoi dati?
Non hai un account? Crealo!
BanconoteMondiali.it
BanconoteMondiali.it
BanconoteMondiali.it
| | | | | |
 Tutti i forum
 Banconote
 Compro Banconote
 Battery Charge and Discharge Tester

Note: E' necessario registarsi per rispondere.
Per registrarti clicca qui. Registrati è GRATIS!

Risoluzione schermo:
Username:
Password:
Modalità formato:
Formato: GrassettoCorsivoSottolineatoSbarrato Allinea a sinistraCentratoAllinea a destra Liena orizzontale Inserire linkInserire email Inserire codiceInserire QuoteInserire lista
   
Messaggio:

* HTML è disattivato
* Il codice nel forum è attivato
Smilies
Sorriso [:)] Sorriso grande [:D] Fico [8D] Timido [:I]
Risata [:P] Diavolo [):] Soldi [;)] Linguaccia [:o)]
Aiha [B)] Non ci credo [8] Triste [:(] Vittoria [8)]
Scioccato [:0] Arrabiato [:(!] Morto [xx(] Carino [|)]
Bacio [:X] Approvo [^] Disapprovo [V] Cosa? [?]

 
   

R E V I S I O N E    D I S C U S S I O N E
whgdmk12345 Postato il 05/12/2022 : 03:44:08
https://www.mktester.com/battery-tester/battery-charge-and-discharge-tester.htmlProduct description#65306;

When the voltage of the battery pack or the voltage of a single battery is less than the set voltage lower limit, or the set discharge duration or set discharge capacity has been reached during discharge, the tester will automatically stop discharging and record the discharge Real-time data of all valuable and continuous processes in the process.



Battery charge and discharge tester Technical index#65306;



Applicable battery

Lead-acid battery

Model

DC220V

Discharge current

0-100A

recharging current

0-30A

Operating mode

Used independently or with a constant-current module

Control accuracy

Discharge current: #8804;±1%; battery pack’s terminal voltage: #8804; ±0.1%; single battery voltage: #8804;±0.05%

Communication with the host PC

RS485 interface

Data storage capacity
2Gbit FLASH

20



Common faults and methods:

No.

Fault

Solution

1

The discharge current is abnormal.

Switch on the air circuit breaker. Make sure the discharge PCB is connected, the battery capacity is not small and the discharge current is not small.

2

Overtemperature

Inspect and make sure the tester is correctly placed and inspect the ventilation and the heat flow direction.

3



There is a current after the air switch is switched on following power-on.

Send the discharge PCB to its manufacturer to be repaired because it is possible that it is burned.

4

Failure of data saving

Restart the tester. Do not switch between internal storage and external storage during discharge.

BanconoteMondiali.it © BanconoteMondiali.it Torna su
Powered By: Snitz Forums 2000 Version 3.4.07
Copyright © 2002-2010 Banconote Mondiali.it. All rights reserved.
Powered by Mattatore.it